ISP1110
General Description
The ISP1110 is a Universal Serial Bus (USB) transceiver that supports Universal Asynchronous Receiver-Transmitter (UART) signaling mode.
The ISP1110 USB transceiver is fully compliant with Universal Serial Bus Specification Rev. 2.0. The ISP1110 can transmit and receive USB data at full-speed (12 Mbit/s).
The ISP1110 transceiver allows USB Application Specific Integrated Circuits (ASICs) with I/O power supply voltage from 1.65 V to 2.85 V to interface to the physical layer of the USB. The transceiver has an integrated 5 V-to-3.3 V voltage regulator for direct powering through USB supply line VBUS and an integrated voltage detector to detect the presence of the VBUS voltage on the VCC(5V0) pin. When VBUS is present, the transceiver is in USB mode. When VBUS is not present, the transceiver can be set to UART signaling mode.
The ISP1110 transceiver is available in HBCC16 lead-free and halogen-free package.
Key Features
- Fully complies with Universal Serial Bus Specification Rev. 2.0
- Supports USB data transfer at full-speed (12 Mbit/s)
- Integrated DP pull-up resistor to reduce external components
- Implemented internal DP pull-up resistor as described in ECN_27%_Resistor
- Integrated 5 V-to-3.3 V voltage regulator to power through USB line VBUS
- VBUS voltage presence is indicated on pin VBUSDET
- Pins VP and VM function in bidirectional mode, allowing pin count saving for ASIC interface
- Used as a USB peripheral transceiver
- Stable RCV output during Single-Ended Zero (SE0) condition
- Two single-ended receivers with hysteresis
- Low-power operation
- Supports 2.8 V UART signaling mode on the DP and DM lines
- Supports VCC(I/O) voltage range from 1.65 V to 2.85 V
- Supports VCC(UART) voltage range from 2.7 V to 4.5 V
- Off-state supply current from VCC(UART) is less than 3 µA
- Static current from VCC(I/O) is less than 3 µA (typical 1 µA)
- Available in small HBCC16 (3 mm × 3 mm) lead-free and halogen-free package
Applications
Mobile phone
Personal digital assistant (PDA)
Other portable devices
CONTACT
For USB technical support and errata sheets (if any), contact wired.support@stericsson.com
Supporting Documents
| Type: | Description: | File Size: | Download: |
| Brochure | USB transceivers | 236KB
|
download
|
| Brochure | USB OTG. A tutorial on USB On-The Go | 354KB
|
download
|
| Brochure | Ultra-low-power transceiver solutions | 886KB
|
download
|
| Datasheet | ISP1110 USB transceiver with UART signaling | 613KB
|
download
|